Heat-glo-fireplace Heat & Glo PALOMA-BZ-MOD User Manual download pdf (Page 45)

Heat & Glo • PALOMA-BZ-MOD, PALOMA-GR-MOD, PALOMA-GY-MOD • 2189-900 Rev. i • 5/12

Initial Break-in Procedure

When you light the appliance, you may notice that it pro-

duces heat which does have an associated odor or smell.

If you feel this odor is excessive it may require the initial

three to four hour continuous burn on high followed by a

second burn up to 12 hours to fully drive off any odor from

paint and lubricants used in the manufacturing process.

Condensation of the glass is normal.

NOTE: The appliance should be run three to four hours

on the initial start-up. Turn it off and let it cool completely.

Remove and clean the glass. Replace the glass and run

the appliance for an additional 12 hours. This will help to

cure the products used in the paint and logs.

During this break-in period it is recommended that some

windows in the house be opened for air circulation. This will

help avoid setting off smoke detectors, and help eliminate any

odors associated with the appliance’s initial burning.

D. After Appliance is Lit

E. Frequently Asked Questions

Fire Risk.

High Temperatures.

Keep combustible household items away from

appliance.

Do NOT obstruct combustion and ventilation air.

• Do NOT place combustible items on top of or

in front of appliance.

• Keep furniture, draperies away from

appliance.

Smoke and odors released during initial operation.

• Open windows for air circulation.

• Leave room during initial operation.

• Smoke may set off smoke detectors.

Smoke and odors may be irritating to sensitive

individuals.

CAUTION

• Prevent accidental appliance operation when not attended.

• Unplug or remove batteries from remote control if absent

or if appliance will not be used for an extended period of

time.

• Property damage possible from elevated temperatures.

CAUTION

Fire Hazard.

Keep combustible materials, gasoline and other

ﬂ ammable vapors and liquids clear of appliance.

• Do NOT store ﬂ ammable materials in the

appliance’s vicinity.

• Do NOT use gasoline, lantern fuel, kerosene,

charcoal lighter ﬂ uid or similar liquids in this

appliance.

• Combustible materials may ignite.

WARNING

ISSUE SOLUTIONS

Condensation on the glass

This is a result of gas combustion and temperature variations. As the ﬁ replace warms, this

condensation will disappear.

Blue ﬂ ames

This is a result of normal operation and the ﬂ ames will begin to yellow as the ﬁ replace is al-

lowed to burn for 20 to 40 minutes.

Odor from ﬁ replace

When ﬁ rst operated, this ﬁ replace may release an odor for the ﬁ rst several hours. This is caused

by the curing of the paint and the burning off of any oils remaining from manufacturing. Odor may

also be released from ﬁ nishing materials and adhesives used around the ﬁ replace.

Film on the glass

This is a normal result of the curing process of the paint. Glass should be cleaned within 3

to 4 hours of initial burning to remove deposits left by oils from the manufacturing process. A

non-abrasive cleaner such as gas ﬁ replace glass cleaner may be necessary. See your dealer.

Metallic noise

Noise is caused by metal expanding and contracting as it heats up and cools down, similar to

the sound produced by a furnace or heating duct. This noise does not affect the operation or

longevity of the ﬁ replace.

Is it normal to see the pilot ﬂ ame burn

continually?

In an intermittent pilot ignition system (IPI), the pilot ﬂ ame should turn off when appliance is

turned off. Some optional control systems available with IPI models may allow pilot ﬂ ame to

remain lit. In a standing pilot system the pilot will always stay on.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 58 59

Comments to this Manuals

No comments

Heat-glo-fireplace Heat & Glo PALOMA-BZ-MOD User Manual Page 45

Comments to this Manuals

Related products and manuals for Kiln Heat-glo-fireplace Heat & Glo PALOMA-BZ-MOD