Heat-glo-fireplace Heat & Glo Gas Fireplace ESC-42ST User Manual

Browse online or download User Manual for Kiln Heat-glo-fireplace Heat & Glo Gas Fireplace ESC-42ST. Heat & Glo Fireplace Heat & Glo Gas Fireplace ESC-42ST User Manual [en]

  • Download
  • Add to my manuals
  • Print
  • Page
    / 68
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/13 1
Model:
ESC-42ST
DO NOT store or use gasoline or other am-
mable vapors and liquids in the vicinity of this
or any other appliance.
What to do if you smell gas
- DO NOT try to light any appliance.
- DO NOT touch any electrical switch. DO
NOT use any phone in your building.
- Immediately call your gas supplier from a
neighbor’s phone. Follow the gas suppli-
er’s instructions.
- If you cannot reach your gas supplier, call
the re department.
Installation and service must be performed
by a quali ed installer, service agency, or the
gas supplier.
WARNING: If the information in these
instructions is not followed exactly, a re
or explosion may result causing property
damage, personal injury, or death.
Owners Manual
Installation and Operation
DO NOT DISCARD THIS MANUAL
NOTICE
This appliance may be installed as an OEM installation in
manufactured home (USA only) or mobile home and must be
installed in accordance with the manufacturer’s instructions
and the manufactured home construction and safety standard,
Title 24 CFR, Part 3280 or Standard for Installation in Mobile
Homes, CAN/CSA Z240MH, in Canada.
This appliance is only for use with the type(s) of gas indicated
on the rating plate.
Installation and service of this appliance should be
performed by quali ed personnel. Hearth & Home
Technologies suggests NFI certi ed or factory trained
professionals, or technicians supervised by an NFI
certi ed professional.
Leave this manual with
party responsible for use
and operation.
DO NOT
DISCARD
WARNING
• Important operating
and maintenance
instructions included.
Read, understand and follow
these instructions for safe
installation and operation.
In the Commonwealth of Massachusetts installation must be
performed by a licensed plumber or gas tter.
See Table of Contents for location of additional Commonwealth
of Massachusetts requirements.
This appliance has been supplied with an integral barrier
to prevent direct contact with the xed glass panel. DO
NOT operate the appliance with the barrier removed.
Contact your dealer or Hearth & Home Technologies if the
barrier is not present or help is needed to properly install one.
HOT SURFACES!
Glass and other surfaces are hot during
operation AND cool down.
Hot glass will cause burns.
DO NOT touch glass until it is cooled
NEVER allow children to touch glass
Keep children away
CAREFULLY SUPERVISE children in same room as
replace.
Alert children and adults to hazards of high temperatures.
High temperatures may ignite clothing or other ammable
materials.
Keep clothing, furniture, draperies and other ammable
materials away.
Page view 0
1 2 3 4 5 6 ... 67 68

Summary of Contents

Page 1 - Owner’s Manual

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/13 1Model:ESC-42ST• DO NOT store or use gasoline or other fl am-mable vapors and liquids in the

Page 2 - A. Congratulations

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/1310C. Clear SpaceWARNING! DO NOT place combustible objects in front of the fi replace or block l

Page 3 - User Guide

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/13 11I. Before Lighting FireplaceBefore operating this fi replace for the fi rst time, have a qua

Page 4

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/1312J. Lighting Instructions (IPI)1. This appliance is equipped with an ignition device which

Page 5 - WARRANTY PERIOD:

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/13 13Initial Break-in Procedure• The fireplace should be run three to four hours continuously on

Page 6 - WARRANTY EXCLUSIONS:

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/13143 3 Maintenance and Service A. Maintenance Tasks-HomeownerThe following tasks may be perfo

Page 7 - Listing and Code Approvals

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/13 15B. Maintenance Tasks-Qualifi ed Service TechnicianThe following tasks must be performed by a

Page 8 - Massachusetts

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/1316Figure 3.1 IPI Pilot Flame Patterns• Inspect orifi ce for soot, dirt and corrosion. Verify o

Page 9

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/13 17A. Typical Appliance SystemNOTICE: Illustrations and photos refl ect typical installations

Page 10 - Figure 2.2 Clear Space

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/1318B. Design and Installation ConsiderationsHeat & Glo direct vent gas appliances are desi

Page 11 - Figure 2.3 Control Module

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/13 195 5 Framing and Clearances A. Selecting Appliance LocationWhen selecting a location for t

Page 12 - WARNING:

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/132Listing Label Information/LocationModel Name: ___________________________________________ Dat

Page 13 - L. Frequently Asked Questions

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/1320CBDAB. Constructing the Appliance ChaseA chase is a vertical box-like structure built to en

Page 14 - Maintenance and Service

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/13 21D. Mantel and Wall ProjectionsWARNING! Risk of Fire! Comply with all minimum clear-ances a

Page 15

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/1322E. Hearth ExtensionWARNING! Risk of Fire! Hearth extension required to protect combustible fl

Page 16 - Light Bulb Maintenance

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/13 23A. Vent Termination Minimum ClearancesRoof Pitch H (Min.) Ft.Flat to 6/12...

Page 17 - Installer Guide

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/1324Figure 6.3 Minimum Clearances for TerminationONPRQX= AIR SUPPLY INLETA = 12 inches...

Page 18 - C. Tools and Supplies Needed

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/13 25A. Approved PipeThis appliance is approved for use with Hearth & Home Technologies DVP

Page 19 - Framing and Clearances

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/1326E. Vent DiagramsWARNING! Risk of Fire. This appliance requires a mini-mum of 24 inches of ve

Page 20 - E=43 IN

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/13 27H2 H1 V1 INSTALLED HORIZONTALLY 1. Top Vent - Horizontal TerminationV1H1Figure 7.3Figure 7

Page 21

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/13281. Top Vent - Horizontal Termination - (continued)Figure 7.5Three ElbowsH1V2H2V1V1H1V2 H2

Page 22 - E. Hearth Extension

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/13 292. Top Vent - Vertical TerminationNo ElbowFigure 7.6V1V1 = 50 ft. Max. (15.2 m)V1 = 3 ft.

Page 23 - Termination Locations

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/13 3 Safety Alert Key:• DANGER! Indicates a hazardous situation which, if not avoided will re

Page 24 - Service

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/1330INSTALLEDHORIZONTALLYV2H2H1V1Three ElbowsV1H1H2V2Ht Max.2 ft 610 mm * * ** 7 in 178 mm3 ft 9

Page 25 - 8-1/2 in

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/13 31A*BA. Pipe Clearances to CombustiblesWARNING! Risk of Fire! Maintain air space clearance t

Page 26 - E. Vent Diagrams

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/1332C. Install the Ceiling FirestopA ceiling fi restop MUST be used between fl oors and attics.•

Page 27 - Figure 7.4

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/13 33D. Install Attic Insulation ShieldWARNING! Fire Risk. DO NOT allow loose materials or insu

Page 28 - Three Elbows

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/1334CAUTION! Risk of Cuts, Abrasions or Flying Debris. Wear protective gloves and safety glasses

Page 29 - FLUE RESTRICTOR

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/13 35B. Securing and Leveling the ApplianceWARNING! Risk of Fire! Prevent contact with:• Saggi

Page 30

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/133610 10 Installing Vent Pipe A. Assemble Vent SectionsAttach Vent to the Firebox AssemblyN

Page 31 - (DVP Pipe Shown)

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/13 37B. Assemble Slip Sections• Slide the inner fl ue of the slip section into the inner fl ue o

Page 32

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/1338D. Disassemble Vent Sections• Rotate either section (see Figure 10.10) so the seams on bot

Page 33

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/13 39E. Install Metal Roof Flashing• See minimum vent heights for various pitched roofs (Figure

Page 34 - Appliance Preparation

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/134 = Contains updated information.14 Appliance Setup A. Fixed Glass Assembly . . . . . . .

Page 35 - NON-COMBUSTIBLE

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/1340SCREWSCAULKSTORM COLLAR(1 of 3)Figure 10.18 Figure 10.18 TERMINATION CAPG. Install Vert

Page 36 - Installing Vent Pipe

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/13 41A. Fuel Conversion• Make sure the appliance is compatible with available gas types.• Conve

Page 37 - C. Secure the Vent Sections

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/1342A. Wiring RequirementsNOTICE: This appliance must be electrically wired and grounded in acco

Page 38 - D. Disassemble Vent Sections

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/13 43Figure 12.2 IPI Wiring DiagramACCENT LIGHT #1ACCENT LIGHT #2EMBER BULBS (1-4)TO JUNCTION B

Page 39

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/1344A. Mantel and Wall ProjectionsWARNING! Risk of Fire! Comply with all minimum clear-ances as

Page 40 - Figure 10.18

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/13 45B. Facing Material• Metal front faces may be covered with non-combustible materials only.

Page 41 - Gas Information

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/1346D. Elevated Hearth SystemsUse the table below to identify the hearth system that will be us

Page 42 - Electrical Information

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/13 4714 14 Appliance Setup Figure 14.1 Glass Top Tab Detail.A. Fixed Glass AssemblyWARNING! R

Page 43

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/1348B. Remove the Shipping MaterialsRemove shipping materials from inside or underneath the fi r

Page 44 - Finishing

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/13 49F. Install Light Bulbs Note: Light bulbs are shipped in the installation manual bag.Ember

Page 45 - C. Doors

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/13 5B. Limited Lifetime Warranty4021-645F 02-18-13 Page 1 of 2Hearth & Home TechnologiesL

Page 46 - D. Elevated Hearth Systems

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/1350G. Install RefractoryCAUTION: Refractory pieces are fragile! Carefully remove the refractory

Page 47 - Appliance Setup

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/13 51I. Mystic Ember PlacementWARNING! Risk of Explosion! Follow ember placement instructions

Page 48 - GLASS FRAME

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/1352J. Install the Log AssemblyGRATE: Locate the pilot assembly. The pilot assembly is denote

Page 49 - F. Install Light Bulbs

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/13 53LOG NUMBER 2 (SRV2146-702): Place Log #2 as shown. The groove on the bottom of Log #2 eng

Page 50 - G. Install Refractory

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/1354Figure 15Figure 14Figure 16.LOG NUMBER 6 (SRV2146-706): Place Log #6 onto grate and log #1.

Page 51 - I. Mystic Ember Placement

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/13 55K. Ember/Mineral Wool PlacementWARNING! Risk of Explosion! DO NOT place embers directly ov

Page 52 - INSTRUCTIONS

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/1356Air Shutter SettingsNG LPESC-42ST 1-1/2 in. Fully OpenO. Air Shutter SettingAir shutter set

Page 53

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/13 5715 15 Troubleshooting With proper installation, operation, and maintenance your gas applia

Page 54 - Log #7 rests

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/1358Troubleshooting (continued)Symptom Possible Cause Corrective Action4. Pilot lights but conti

Page 55 - BACK SUPPORT

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/13 5916 16 Reference Materials Appliance Dimensions TableA. Appliance Dimension DiagramDimens

Page 56 - M. Install Mesh

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/136B. Limited Lifetime Warranty (continued)4021-645F 02-18-13 Page 2 of 2WARRANTY CONDITIONS:

Page 57 - Troubleshooting

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/1360B. Vent Components DiagramsFigure 16.2 DVP vent components 10-1/2 in.(267 mm)10-7/8 in.(27

Page 58 - Troubleshooting (continued)

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/13 61DVP-TRAP1DVP-TRAP2DVP-TRAPK2DVP-TRAPK1DVP-TRAPHorizontal Termination Cap15-1/8 in.(384 mm)1

Page 59 - Reference Materials

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/136213-1/4 in.(337 mm)24-5/8 in.(625 mm)27-1/2 in.(699 mm)RF6MRoof Flashing Multi-pak31 in.(787

Page 60 - Diameter: 10 in./254 mm

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/13 637-1/4 in.12 in.305 mm(184 mm)5-1/4 in.(133 mm)12-1/2 in.(318 mm)DVP-TVHWVerticalTermination

Page 61 - DVP-TRAPK1

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/1364Service PartsESC-42STBeginning Manufacturing Date: Dec 2008 Ending Manufacturing Date: Activ

Page 62

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/13 65Service PartsESC-42STBeginning Manufacturing Date: Dec 2008 Ending Manufacturing Date: Acti

Page 63 - SLP Low Profi le Cap

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/1366Service PartsESC-42STBeginning Manufacturing Date: Dec 2008 Ending Manufacturing Date: Activ

Page 64 - ESC-42ST

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/13 67Service PartsESC-42STBeginning Manufacturing Date: Dec 2008 Ending Manufacturing Date: Acti

Page 65

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/1368Heat & Glo, a brand of Hearth & Home Technologies 7571 215th Street West, Lakeville,

Page 66

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/13 7C. BTU Specifi cationsMODELS: ESC-42ST, ESC-42STLPLABORATORY: Underwriters Laboratories, Inc

Page 67

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/138H. Requirements for the Commonwealth of MassachusettsFor all side wall horizontally vented ga

Page 68 - DO NOT DISCARD THIS MANUAL

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/13 9Figure 2.1 General Operating PartsB. Your FireplaceWARNING! DO NOT operate fi replace before

Comments to this Manuals

No comments